Leaf Eater Cutting Lines
12 pack of Flowtron heavy duty cutting lines. Replace cutting lines when a noticeable decrease in shredding efficiency is
observed.
- Heavy duty line special designed for leaf shredder use.
- Made in the USA
- Fits Models LE-900, LE-800, LE-400, and all Sears Leaf-Whacker Models
- To maximize the life of your Flowtron Leaf Eater cutting line, install new lines as described below.
Replacing Cutting Lines
- Remove used cutting lines by pulling the used line out of the spinner head inside the housing.
- Feed the end of a new line through the hole in the top post. Keep the line even on both sides of the hole.
- Take both ends of the line, and feed through the ferrule hole.
- Repeat the same procedure for the line on the other side of the Spinner Head.
- It is important that the ends of the line be even after feeding through the ferrule hole.
|
|
